Reduce Inches and Sculpt Your Body Without Surgery with LINNA Body Sculpting by iCOONE® + CoolSwissPrime Plus

LINNA Body Sculpting by iCOONE® + CoolSwissPrime Plus is a non-surgical body-contouring program designed to help reduce localized fat while improving skin quality so that the skin looks firmer, smoother, and the body contours appear more defined. The program combines two technologies: iCOONE® and CoolSwissPrime Plus.

LINNA Body Sculpting by iCOONE® is an Italian body-contouring and skin-quality treatment that uses Roboderm® Microstimulation through Multi Micro Alveolar Stimulation, or M.M.A.S, to gently and consistently stimulate the skin and connective tissues.

The treatment handpiece delivers microstimulation at speeds of up to 21,600 stimulations per minute to support blood circulation and lymphatic drainage, improve the elasticity of connective tissue, and stimulate collagen and elastin production beneath the skin.

It is therefore suitable for individuals concerned about cellulite, orange-peel skin, uneven skin texture, skin laxity, easy fluid retention, or those who want to improve skin quality after fat reduction or weight loss.

The iCOONE® device used at LINNA Clinic is the iCOONE® Laser Med, a premium body-contouring and skin-quality technology from Italy with the following features:

• Uses Roboderm® Microstimulation through Multi Micro Alveolar Stimulation (M.A.S) together with LASER 915 nm and LED 650 nm to provide consistent micro-level stimulation to the skin and connective tissues, support blood and lymphatic circulation, reduce fluid retention, and help the skin appear firmer and smoother while body contours look naturally slimmer.
• Features 11 ergonomically designed handpieces suitable for different areas of the body, including the face, neck, upper arms, abdomen, thighs, hips, back, and difficult-to-reach areas.
• Includes more than 40 intelligent programs that can be adjusted according to different treatment goals, including lymphatic stimulation, reduction of swelling and fluid retention, cellulite care, improvement of uneven skin texture, fibrosis care, and skin-firming support.

CoolSwissPrime Plus is the latest-generation Cryolipolysis fat-freezing technology from Switzerland. It features silicone cooling applicators designed to closely conform to the skin, helping reduce fat 30–40% more effectively than the previous generation while providing greater comfort. The device delivers sub-zero temperatures of approximately -5°C to -11°C to cause damage to fat cells, which are subsequently eliminated from the body through natural processes. This results in a permanent reduction in the size of the fat layer in the treated area. It is suitable for localized fat deposits in areas such as the abdomen, waist, upper arms, thighs, hips, and back.

The CoolSwissPrime Plus device used at LINNA Clinic is the latest-generation model from Switzerland and meets international standards. Its key features include:

• A new-generation applicator made from Medical Flexible LSR Silicone, a highly flexible medical-grade silicone that conforms better to the body's contours and provides more consistent tissue suction, helping reduce discomfort during treatment and the likelihood of bruising afterward.
• A 4 Dual Cooling Chip system inside the applicator that distributes cooling evenly through 360 degrees and maintains a stable temperature throughout treatment, helping reduce fat 30–40% more effectively than the previous-generation machine.
• A Pre-heating system that warms the skin before cooling begins for greater comfort, together with a Post-heating system that helps reduce redness or bruising after treatment.
• Ability to treat up to 4 areas simultaneously in a single session, requiring only 35 minutes.

When the two technologies are appropriately combined, iCOONE® helps improve the elasticity of the skin and connective tissues, supports collagen and elastin production, and stimulates the body's circulation. This can help the skin appear firmer and smoother and reduce the appearance of cellulite and orange-peel skin naturally. CoolSwissPrime Plus, meanwhile, targets localized fat and permanently reduces the size of the fat layer, helping create more defined body contours. Together, the program addresses multiple dimensions of body contouring to produce clearer and more natural-looking results.

However, LINNA Body Sculpting by iCOONE® + CoolSwissPrime Plus is not a direct weight-loss method and cannot replace dietary control or exercise. It is a complementary approach that may help provide more targeted body-contouring care. The number of sessions, treatment areas, and timing between procedures should be planned under the assessment of a physician or qualified professional.

This program may be suitable for individuals who want to improve body contours, reduce measurements, and restore skin quality without surgery or downtime, especially those with localized fat deposits, loose or less-firm skin, and cellulite. Suitable groups include:

• Individuals with localized fat on the abdomen, waist, upper arms, thighs, hips, or back.
• Individuals who have attempted to lose weight or reduce excess fat on their own but have not achieved the results they expected.
• Individuals who practice IF (Intermittent Fasting) or control their diet but still do not see reductions in measurements or skin firmness.
• Individuals who want to reduce localized fat and create slimmer-looking contours without surgery or liposuction.
• Individuals who have lost weight or fat but are left with loose or sagging skin and less-defined contours.
• Individuals with cellulite, orange-peel skin, wavy skin texture, or uneven-looking skin.
• Individuals who experience easy fluid retention and often feel swollen or uncomfortable.
• Postpartum mothers who want to improve body contours, cellulite, and the appearance of stretch marks.
• Individuals preparing their body shape for important occasions such as weddings, photoshoots, or other situations where they want greater confidence.

CoolSwissPrime Plus is the latest-generation Cryolipolysis fat-freezing technology from Switzerland. It is designed to target localized fat without surgery or needles and is suitable for subcutaneous fat deposits in areas such as the abdomen, waist, upper arms, thighs, hips, back, or areas that are difficult to reduce through diet and exercise alone.

CoolSwissPrime Plus operates by delivering temperatures of approximately -5°C to -11°C through highly flexible Medical Flexible LSR Silicone suction applicators available in different sizes to suit different treatment areas. It combines this with 4 Dual Cooling Chip technology that delivers cooling through 360 degrees and maintains stable cooling throughout the treatment. The controlled cold causes fat cells in the treatment area to deteriorate and die, after which they are gradually eliminated from the body through natural processes. This helps the treated area become smaller without causing a Yo-Yo Effect or recurrent weight gain, provided the patient appropriately manages body weight and lifestyle after treatment.

Body fat can be divided into two main types.

Subcutaneous Fat is the upper layer of fat located between the skin and the muscles. It can be pinched or grasped externally and commonly accumulates around the abdomen, waist, upper arms, thighs, hips, and buttocks. This is the type of fat that can be improved with CoolSwissPrime Plus.

Visceral Fat is located deeper inside the abdominal cavity and surrounds important organs such as the intestines, liver, and kidneys. This type of fat cannot be addressed through localized fat-reduction procedures and requires appropriate lifestyle changes such as dietary control, regular exercise, and sufficient rest.

CoolSwissPrime Plus helps reduce subcutaneous fat deposits through Cryolipolysis. The physician uses the suction applicator to draw the skin and fat layer into the treatment head, then applies temperatures of approximately -5°C to -10°C. This causes subcutaneous fat cells to die and subsequently be removed from the body through natural processes. The fat layer in the treated area therefore becomes permanently smaller. The body does not create replacement fat cells in the area, provided the patient maintains body weight and prevents significant weight gain after treatment.

After localized fat has been reduced through weight control, exercise, or CoolSwissPrime Plus, the skin in that area may not immediately become smaller, firmer, or smoother. The skin and connective tissues need time to adapt and recover elasticity, especially in individuals who previously had larger amounts of fat, whose skin was significantly stretched, or whose collagen and elastin levels have declined with age.

iCOONE® therefore helps support skin tightening after fat reduction through Roboderm® technology and Multi Micro Alveolar Stimulation. It provides consistent micro-level stimulation to the skin and connective tissues to promote blood circulation and lymphatic drainage and reduce edema and retained fluid. These are among the factors that can make the body appear swollen, less firm, or uneven after subcutaneous fat has decreased.

The treatment also combines LASER 915 nm, which can deliver energy deeper toward the fat and muscle layers, helping increase oxygen supply to cells and tissues and reduce tension from subcutaneous fibrous tissue. This can help improve wavy skin texture and reduce the appearance of orange-peel skin. LED 650 nm supports collagen and elastin production, helping improve skin elasticity and create naturally firmer-looking contours.

However, results after iCOONE® may vary between individuals depending on factors such as age, skin quality, amount of accumulated fat, treatment area, and individual body response. Those interested should consult a physician for assessment and appropriate treatment planning.

Many people who lose weight or reduce body fat may still experience loose contours, a larger-looking silhouette, visible skin waves, or cellulite because of the following factors:

• The skin has been stretched by accumulated fat for a long period. When fat decreases, previously stretched skin may not immediately contract, resulting in loose or sagging skin or wrinkles in some areas.
• Collagen and elastin decrease with age. As the body ages, collagen and elastin levels decline, reducing skin elasticity. When combined with fat loss, the skin may appear loose and less firm.
• Edema or retained fluid in the tissues may occur when blood and lymphatic circulation are imbalanced, causing body contours to look swollen, tight, or larger than they actually are even after some fat has decreased.
• Tension from fibrous bands and connective tissues beneath the skin can make the skin appear uneven, creating visible waves or orange-peel texture.
• Visceral fat may remain, causing abdominal protrusion and preventing the waist from becoming smaller. Reducing visceral fat requires time and consistent lifestyle changes.

LINNA Body Sculpting by iCOONE® + CoolSwissPrime Plus can be planned for multiple areas of the body, including:

• Abdomen and waist: helps reduce accumulated fat in the central abdomen and love handles.
• Upper arms: helps reduce fat on the upper arms and underarms, making the arms look slimmer and firmer.
• Thighs: helps reduce excess fat, cellulite, and orange-peel skin on the inner, outer, and back of the thighs.
• Hips and buttocks: helps reduce fat around the hips and Banana Roll area while improving skin firmness and smoothness.
• Back: helps reduce accumulated fat around the back and shoulder-blade area, including Bra Fat, helping improve confidence when dressing.

In general, iCOONE® may be planned either before or after CoolSwissPrime Plus depending on skin condition, amount of fat, fluid retention, and individual treatment goals.

The physician may recommend starting with iCOONE® to stimulate the skin and subcutaneous tissues, support blood and lymphatic circulation, reduce fluid retention, and prepare the skin. CoolSwissPrime Plus can then be performed immediately afterward without requiring an interval, helping reduce localized fat and improve body contours naturally.

Alternatively, for patients who are able to visit the clinic consistently and will remain in Thailand long enough, the physician may recommend performing CoolSwissPrime Plus first and then waiting approximately 1 week before returning for iCOONE®.

Although LINNA Body Sculpting by iCOONE® + CoolSwissPrime Plus is non-surgical and requires no downtime, several precautions should be understood before treatment:

• Inform the physician in detail about your health history, underlying conditions, medications, and previous treatments, particularly if you are pregnant or may be pregnant, have cold sensitivity, open wounds, inflamed or infected skin in the treatment area, vascular disease, blood clots, or uncontrolled underlying medical conditions.
• Understand that the program is not a direct weight-loss method. It is intended for localized fat care together with improvement of skin quality.
• The program cannot reduce Visceral Fat. Individuals with visceral fat need dietary control, exercise, and lifestyle modifications.
• Maintain appropriate expectations. Changes in fat reduction and skin firmness occur gradually through the body's natural processes and vary according to skin condition, amount of fat, and individual self-care.
• Healthy lifestyle habits should be maintained, including dietary control, increased water intake, regular exercise, and adequate rest to help maintain body-contouring and skin-quality results longer.
• Temporary symptoms may occur after treatment, including redness, bruising, tightness, numbness, or mild soreness in the treated area. These usually gradually improve on their own within 1–3 days when post-treatment instructions are followed carefully.

Patients should follow pre- and post-treatment instructions to ensure the process is appropriate and safe.

• Eat nutritious foods and drink plenty of water to support skin and tissue recovery and the body's natural waste-elimination processes.
• Avoid alcohol during the first 24–48 hours after treatment to allow the body to recover fully.
• Avoid very salty foods, fermented or pickled foods, high-fat foods, and processed foods to reduce the risk of fluid retention.
• Avoid squeezing, pressing, or massaging the treatment area and avoid activities that generate excessive heat in the skin during the first 24–48 hours.
• Light exercise such as brisk walking, jogging, yoga, or Pilates may be performed to support circulation and reduce feelings of tightness.
• Continue healthy habits for better long-term results, including appropriate dietary control, regular exercise, and sufficient sleep.
• If abnormal symptoms occur in the treatment area, such as severe pain, swelling, redness, blisters, skin discoloration, fever, chills, or a hard lump, seek medical attention promptly.

Dietary control is recommended after treatment to help maintain body-contouring, measurement, and skin-quality results for longer.

This program focuses on localized fat reduction and improving skin firmness and smoothness. It is not a permanent method of weight loss or body-size reduction.

If the patient continues to consume high-calorie foods regularly or does not exercise, fat accumulation may increase again, the body may appear less firm, and cellulite may become more noticeable again.

CoolSwissPrime Plus and Emsculpt are body-contouring technologies with different treatment goals.

CoolSwissPrime Plus focuses on reducing localized fat by using sub-zero cooling to cause fat cells in the treatment area to be gradually eliminated from the body. It is suitable for mild to moderate localized fat on areas such as the abdomen, waist, upper arms, thighs, or back.

Emsculpt focuses on muscle stimulation using High-Intensity Focused Electromagnetic Energy (HIFEM), causing repeated muscle contractions. It is suitable for individuals who want to improve muscle strength and create more visible muscle tone in areas such as the abdomen, upper arms, hips, thighs, and calves.

• Does CoolSwissPrime Plus Hurt?

At the beginning of treatment, you may feel warmth, tightness, or a suction sensation on the skin. The area then gradually becomes cold and numb, reducing sensation significantly. You can sit and relax or use your phone during treatment. Pain or skin discomfort varies between individuals depending on skin sensitivity, fat-layer thickness, and the treatment area.

• Will There Be Swelling After CoolSwissPrime Plus?

Some individuals may experience mild swelling or soreness in the treated area, but these symptoms generally resolve on their own within 1–3 days.

• What Are the Benefits of Combining iCOONE® with CoolSwissPrime Plus?

The combination helps stimulate blood circulation and lymphatic drainage, support the elimination of waste products and destroyed fat cells from the body, reduce swelling, bruising, or skin tightness, and help restore skin quality so that it looks naturally firmer and smoother when performed continuously as a course according to the physician's recommendations.

• Can You See Results After Only One Session?

Some individuals may begin to feel lighter and more comfortable, notice smoother skin, or see more defined contours after the first session. Localized fat-reduction results generally begin to become noticeable within approximately 3 weeks to 1 month and become more clearly visible at around 1 month. Results vary between individuals.

• Can This Program Help You Lose Weight?

This program is not a direct weight-loss method. It focuses on reducing localized fat while helping improve skin quality so that body contours appear naturally firmer and more defined. For overall weight reduction, dietary control, exercise, adequate sleep, and appropriate stress management should be combined.

• Can the Fat Come Back After It Has Been Reduced?

Localized fat cells that have died are permanently eliminated from the body. However, if a patient continues consuming more calories than the body requires or adopts behaviors that cause additional fat accumulation later, fat may accumulate again, similar to what can occur after liposuction or surgical fat removal.